Free Shipping on orders over $200

Subscribe to get 10% off your first order

Free Shipping on orders over $200

Subscribe to get 10% off your first order

The Clean Shower Filter Refills

Our Refill pack helps keep your water cleaner, fresher, and healthier, without cartridge waste.

Suitable For: Made to fit The Clean Filter and The Clean Combo, we recommend repurchasing Refills every 3 – 6 months, depending on usage.
Removes 99% Chlorine: Chlorine Removal Balls help reduce chlorine that can dry out skin and hair.
Odour Control: Deodorising Balls absorb impurities and tackle odours before they hit your skin.
Bacteria Defence: Anti-Bacterial Balls, infused with silver, fight bacteria and reduce lead.
Eco-Friendly Refills: Unlike bulky cartridge filters, our refillable system creates less waste and lasts longer.

Price: Price range: $49.00 through $64.00

Additional information
You’ll Receive +
2 Refill Packs, estimated to last 3 - 6 months depending on shower usage.
Is it required to purchase Refills? +
Yes, but only if you’ve purchased The Clean Filter (regular and jumbo) or The Clean Combo (regular and jumbo). The Clean Conditioner does not require refilling.
Do the Clean Filter and Combo purchases come pre-filled? +
Yes, all Clean Filter and Combo purchases come already filled. You will need to repurchase refills.
How To Refill Your Filter

Removing the Old Filter Contents

Tip: Use a plastic or metal bowl, and place everything on a wooden or plastic chopping board (not on stone or laminate surfaces).

  1. Make sure the water is turned off.
  2. Unscrew the shower hose from the shower head.
  3. Unscrew the shower filter from the wall connection, then unscrew the shower head from the filter.
  4. Remove the white wadding from inside the filter.
  5. To loosen the contents, gently tap the female-thread end of the filter on the chopping board. Important: Do not tap it on stone, laminate, or other hard surfaces.
  6. Hold the filter over a bin. Insert the wooden dowel into the male-thread end and push the old filter contents out.
  7. Rinse the inside of the filter to clean it.

Installing the New Filter Contents

Tip: It helps to do this in a plastic or metal bowl to catch any spills.

  1. Stand the empty filter casing upright in the bowl.
  2. Place the first filter disc inside, making sure it covers the outlet at the bottom.
  3. Pour the new filter refills into the filter casing.
  4. Insert the second filter disc on top.
  5. Install the filter following the original install instructions for your shower setup.
  6. Turn the water on and check for leaks. If needed, tighten the fittings a little more.

NOTE: Do not stand under the shower when turning the water on. This will flush out any dust from the filter. Let the shower run for a few minutes before use.

Proof in Every Shower

You May Also Like

There is no related product for this category