Magnesium & Mineral Ball Shower Filter

What You Get

Shower Filter

Description: 316 Marine grade stainless steel

Threads : 1/2” Female (screws to Showersoft) 1/2″ Male (screws to shower hose)

Overall Length : 250mm
Housing OD : 31.8mm
Filteration Area : 81.5cm2

Shower Filter Media Contains

• Magnesium Balls
• Tourmaline Energy Balls
• Negative Ion Balls
• FIR Ceramic Balls

The Shower Filter comes fully assembled ready to install and use

How To Install The Shower Filter On A Shower Hose & Handle

1. Make sure the water is off
2. Unscrew the shower hose that connects to the water inlet (this is the fitting coming out of the wall)
3. Check the rubber washer is in place and screw the shower filter to the water outlet male thread and tighten.
4. Screw the end of the hose to the male thread of the Shower Filter and tighten
5. Turn the water on and make sure there are no leaks, if there is tighten the fitting

NOTE: Do not stand under the shower when you turn the water on. Turning the water on will flush the carbon media dust out of the filter.  Let the shower run for a few minutes and it is then safe to use.

Install is done…enjoy your shower!

How To Remove The Activated Carbon Filter Media

Tip: Use a plastic or metal bowl and a wooden or plastic chopping board

Removing The Old Shower Filter Media

1. Make sure the water is turned off
2. Unscrew the shower hose from the shower head
3. Unscrew the shower filter from water connection point, and unscrew the shower head from the filter body
4. To loosen up the media remove the wadding and then tap the female thread end of the filter on the chopping board. DO NOT tap this on stone/laminate or other constructed bench top
5. Put the filter over a bin and insert the wooden dowel in the mail thread end of the filter housing and push the media out the filter
6. Give the filter housing a wash to clean it out

Installing The New Shower Filter Media

We suggest doing this in a plastic or metal bowl

1. Stand the filter housing up in the bowl
2. Insert the filter disc and make sure it is sitting across the outlet of the filter housing
3. Pour the media into the filter housing
4. Insert the second filter disc
5. Screw the filter body to the shower head
6. Screw the assembled shower filter to the wall connection point
7. Turn the water on and make sure there are no leaks, if there is tighten the fittings

NOTE: Do not stand under the shower when you turn the water on. Turning the water on will flush the carbon media dust out of the filter.  Let the shower run for a few minutes and it is then safe to use.

CONGRATULATIONS the new shower media filter replacement is done so celebrate by having a shower!

How Long Will It Last?

The Filter Housing

Manufactured from 316 marine grade stainless steel these fitting will last 10 to 15 years or even longer before needing to be replaced

Filter Media

Depending on the number of people showering on a daily basis, the filter media will need to be replaced every 12 months or maybe sooner if your water is extremely dirty.

Changing the filter will take about 10 to 15 minutesDoes It Need Any Replacement Parts?

The shower softener has no replacement parts.  The filter media will need to be replaced.